I-RGB enobulungisa ikhokelwe 0404 (1010 metric)

Ngaba ikhokelwa yi-LED efanayo ne-RGB?

I-RGB ikhokelele, ngokufanayo negama, liya kuba nemibala emithathu ngaphakathi kwale phumela. I-ther inezikhonkwane ezi-4 phantsi kwe-SMD ekhokelwayo, ukuze sikwazi ukulawula umbala ngokuqhagamshela izikhonkwane kwisekethe. I-LED ye-LED, ikwafana ne-RGB ekhokelayo, kuya kuba nee chip ezintathu ezinombala obomvu, oluhlaza nohlaza okwesibhakabhaka ngaphakathi. Kodwa kwangaxeshanye, kuya kubakho kwakhona ukwakhiwa ngaphakathi ukulawula ukukhanya. Kuya kufuneka ukuba usebenze le ic ekwakheni ukuze le lehlelo ineentloni lingasebenza njengoyilo lwakho. Kule 1010RGB-WS, siphaphaze iitshipsi ezintathu kunye nokwakha i-ic kunye ngaphakathi kwecala le-mini smd. Kwaye kwangaxeshanye, siphinde siligubungele i-LED ene-lens engabonakaliyo. Enokuqinisekisa ukuba sinokufumana isiphumo esihlebiso kwaye le i-1010 RGB yakhokelela ekusebenziseni iprojekthi yokubonisa.

Ine-101010 (4040 RGB yakhokelela kwi-SMD ye-LSD ye-SMD:

* Ukuba obu bukhulu be-RGB zakhokelela akunakuhlangatyezwane nenu, i-3528 i-RGB ikhokelele, i-3525 RGB ikhokelele, i-2121 RGB ikhokelele okanye i-1515 i-RGB ifumaneke;

Iimbonakalo:

• Ukwakha-kwi-IC eguqukayo nge-ic ebomvu, eluhlaza kunye ne-Blue kukhokelele i-chip ezintathu ngaphakathi;
• Ifumaneka ngeteyiphu kunye ne-reel;
• Uhlobo lweLensi: yahlukile;
• Unxibelelwano oluphezulu, ubukhulu be-radical rateation kunye nokulula khokelela iMfazwe;
• I-Chip Dement: 305um, 305um, 305um;

Iimpawu ze-Ecotrucal Oflical Official (TC = 25 ℃ )

Izicelo eziphambili:

Isibane esingasemva, Isalatha ukukhanya;

Ulawulo lwamashishini;

Izixhobo zonyango kunye nezixhobo zonxibelelwano;

Ii-elektroniki ze-elektroniki;

Ukuphatha amanyathelo okhuseleko:

Thelekisa kwi-Epoxy ecapusunt enzima kwaye i-britettle, i-silicone ithambile kwaye iguqukele kwi-alhouth inciphisa kakhulu i-therhouth yayo inciphisa uxinzelelo lwe-thermal, ichaphazeleka kakhulu ekonakaleni ngamandla omatshini. Ngenxa yoko, amanyathelo okhuseleko akhethekileyo okuphatha kufuneka aqwalaselwe ngexesha leNdibano esebenzisa iimveliso ze-LILCEON ezingeneyo. Ukusilela ekuthobeleni kunokukhokelela kumonakalo kunye nokusilela kwangaphambi kwexesha kwe-LED

1. Thwala icandelo ecaleni kwecala eliphantsi usebenzisa i-forgops okanye izixhobo ezifanelekileyo.

2, musa ukuchukumisa ngokuthe ngqo okanye ukuphatha i-lens yelensi yesilika. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-BA plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.